How to Connect a Samsung TV to Wi-Fi Using WPS
Quick Answer
Open Wireless in Network Settings, select Use WPS, press the router WPS or PBC button within 2 minutes, then check Network Status. The TV connects automatically using WPS.
Manual Illustration

Supported Connection Methods
- Wireless network connection using WPS/PBC.
Before You Start
- This guide covers the WPS method only; your wireless access point must have a WPS or PBC button.
- Press the router WPS or PBC button within 2 minutes after selecting Use WPS.
- The screen can differ depending on the model and geographical area.
- This procedure does not cover password-based or no-remote network setup.
Method 1
1. Open Wireless in Network Settings
Go to Home > left directional button > Settings > All Settings > Connection > Network > Open Network Settings, then open Wireless in Network Settings. The wireless network list is displayed.
2. Select Use WPS
At the bottom of the wireless network list, select Use WPS. The TV is ready for the router button connection.
3. Press the router WPS or PBC button within 2 minutes
Press the router WPS or PBC button within 2 minutes. The TV connects automatically.
4. Check Network Status
Go to Home > left directional button > Settings > All Settings > Connection > Network, then check Network Status. The current network status is displayed.
Troubleshooting Connection Problems
- This guide covers the WPS method only; your wireless access point must have a WPS or PBC button.
- Press the router WPS or PBC button within 2 minutes after selecting Use WPS.
Model Notes
This guide is limited to QN65QN90CAFXZA. Other TV models, remote types and menu generations require their own procedure.
Source Information
This independent help article is based on executable procedures extracted from Samsung user manuals for the supported models. It is not an official Samsung support page. Menu and control illustrations are based on the same Samsung user-manual documentation.